Circular cutting machine

Short Description:

Circular cutting machine

Product Detail


Product Tags

Circular cutting machine

1. Introduction

This semiautomatic cutter is made of A-alloy. The machine has two groups of speed change. It uses SCR to control speed. There are roller wheels on bottom of body. So, it is easy to move. The reducing box is used to change the speed to make the axis revolve. You can adjust the radius of cutting circle. It can cut on vertical steel plate and inclined plane. The machine improves efficiency, assures the quality and decreases the working strength.

2. Technical Parameters:

1.Machine dimension :750×300×700(Length×Width×Height)
2. Weight(Body) :38 KG
Diameter of cutting circle :Ø30~Ø600mm
Thickness of steel plate. :5~100mm
Cutting speed :0.2~6.0 r.p.m
Cutting accuracy :<1mm/1r
The round error is below 1mm/r. The roughness of cutting
surface is
4.Motor :ZTY-261 DC permanent magnetic motor
5.Rotational speed :3600 r.p.m.
6.Power :30W
7.Voltage :110V
8.Control case Power :AC 220V+10% 50HZ
Fuse :1A

3. Features:

①. Driving mechanism
It is made up of ZYT-261DC permanent magnetic motor, a pair of reducing worm and three pairs reducing gears.
②. Body
The body is made up of prime ingot parts, A-alloy parts and many no-seam pipes.
③. Torch and Tip
The torch adopts equal pressure and can move up and down by gear rack. The tip is CO2 1#-3#. You can adjust the torch according to the angle of groove.
④. Electric system
The electric system is made up of electric case, and motor. It is equipped with adjusting speed potentiometer and reversing switch on the surface of electric case. There are a supply transformer and a control wire panel in the electric case.

4. Methods of cutting and piercing

 Cut from the end of steel plate.
②Pierce steel plate before cutting.
③Drill a hole before cutting.

  • PREVIOUS:Table Plasma Cutting Machine for Metal Sheet
  • NEXT:Portable Gas Cutting Machine

  • Write your message here and send it to us
    * *